Fully Automatic Water Level Controller With Four Level Indications for Tank and Three Level Indications for Sump

These controllers do not need operator for performing start and stop operations. Fully automatic water level controller switches ON the motor when the water level in the tank becomes low (desired prefixed lower limit) making sure that water is present in the sump. It switches OFF the motor once the tank becomes full (prefixed higher limit) and also when the sump is empty. The added feature of this model is 4 LED indications for tank and 3 LED indications for sump to know the levels of water.

Product Description:

Power ON/OFF switch: This switch is provided at the left side to switch ON or switch OFF the controller unit.

Power ON LED: It indicates the power supply to the unit.

Power ON LED: It indicates the power supply to the unit.

Low/High Voltage LED: It indicates Low/High Voltage power supply. Motor pump gets switched off and is protected from such condition.

Dry Run LED: It indicates the dry run of the motor pump. If there is no water flow in the inline pipe of the overhead tank for 1 minute, motor gets switched OFF preventing it from Dry Run.

Motor ON LED: It indicates the motor ON condition.

Tank Level Indication: 25%, 50%, 75% and 100%.

Sump Level Indication: 33%, 66% and 100%

Manual/Auto mode switch:

Auto mode: In AUTO mode, AUTO ON and AUTO OFF operation occurs.

Manual Mode: Helps to switch ON the motor manually. In this mode, the motor will be constantly running.

Semi-Automatic: (Manual ON and Auto OFF) function is achieved by changing this switch position from Manual mode to Auto mode.

Semi-Automatic: (Manual ON and Auto OFF) function is achieved by changing this switch position from Manual mode to Auto mode.

Salient Features :

Visual LED indication.

Long Life

Easy to install

Suitable for Any Type of AC motor (Single/Three phase motor – Mono-block, Jet Pump, Submersible, etc.)

It supports Magnetic float switch/sensor, Contact type sensor

No Electric Shock

Advanced Embedded Technology

Months Warranty

Application:

Automatic water level controller is of much used in metro cities, bungalows, industries, hospitals and in luxurious apartments and homes. Use of this product saves water, saves electricity and saves time.

Useful in case of under ground tank or ground level tank (sump) to tank set up. Helps in preventing overflow of water from the overhead tank.